Multipurpose primer for use on surfaces that are cracked, aged, or checked.Use as a base coat whenever the surface to be painted is aged, cracked, checked, pitted, or in any way less thansmooth. Quick to dry and easy to sand, EZ Prime 6149 can be used on fiberglass, wood and previously paintedsurfaces. Seal bare wood first with 2018 Clear Sealer, Model 250134 to provide water resistance and dry rotprotection. Not for use below the waterline. Apply any Pettit, Z-Spar or Shipendec enamel as a topcoat.Key featuresVersatile primer that easily hides imperfections for a smoother finish surfaceEasy one-part applicationHigh filling, fast covering formula cuts down on number of coats neededCan be used below all Old Salem, Z-Spar, Shipendec enamelsPhysical dataType: Oil modified alkydFinish: FlatCoverage: 400 sq. ft/gal.VOC: 457 g/lFlash point: 113FApplicationApplication method: Brush, roller, or sprayNumber of coats: One or TwoDry film thickness: 1.75 milsWet film thickness: 3.8 milsApplication temperature: 50 F. Min. / 90F. Max.Thinner: 120 Brushing ThinnerDrying Times* (Hours) Drying @50F @70F @90F To Touch 4 hr. 1 hr. 1-1/2hr. To Recoat 16 hr. 4 hr. 2hr. More informationFor detailed application instructions, see the Pettit EZ-Prime Data Sheet. NOTE: Manufacturer data sheets aresubject to revision. Linked data sheets are believed to be accurate at the time of publication.